Duke TGHF-32PG at www.realspat.com

Certifications	UL
Width (in)	320
Height (in)	360
Depth (in)	320

Counter top options:

4" to 6" riser (backsplash) on rear +$211.50 4" to 6" riser (backsplash) on rear

Recess top to hold 18" x 26" pans, NOTE: not available with model #HTD-BASE-M heat in base option +$860.40 Recess top to hold 18" x 26" pans, NOTE: not available with model #HTD-BASE-M heat in base option

Extend width of top up to 12", for a 44" or less overall top, with stainless steel fixed brackets +$136.80 Extend width of top up to 12", for a 44" or less overall top, with stainless steel fixed brackets

14ga stainless steel top, in lieu of standard +$136.80 14ga stainless steel top, in lieu of standard

Internal Locking Device (on both ends), stainless steel pin & latch line up device under countertop, per unit price (Note: Units required to be portable) +$194.40 Internal Locking Device (on both ends), stainless steel pin & latch line up device under countertop, per unit price (Note: Units required to be portable)

Deluxe extended top, 32" wide & 1/2" thick white poly cutting board pinned +$723.60 Deluxe extended top, 32" wide & 1/2" thick white poly cutting board pinned

**Spillage pans*:**

NOTE: Spillage pan set required for wet operation, please select below: NOTE: Spillage pan set required for wet operation, please select below:

Spillage Pan, stainless steel water pans for gas unit, coved, 6-1/4" deep, holds 12" x 20" full-size & fractional food pans, NSF +$122.40 Spillage Pan, stainless steel water pans for gas unit, coved, 6-1/4" deep, holds 12" x 20" full-size & fractional food pans, NSF

Spillage Pan, vented aluminum water pans for gas unit, coved, 6-1/4" deep, holds 12" x 20" full-size & fractional food pans, NSF +$67.50 Spillage Pan, vented aluminum water pans for gas unit, coved, 6-1/4" deep, holds 12" x 20" full-size & fractional food pans, NSF

**Powder coat colors*:**

Orange powder coat paint finish Orange powder coat paint finish

Silver Hammer powder coat paint finish Silver Hammer powder coat paint finish

Bright White powder coat paint finish Bright White powder coat paint finish

Fence Green powder coat paint finish Fence Green powder coat paint finish

Stone Gray powder coat paint finish Stone Gray powder coat paint finish

Hollyberry Red powder coat paint finish Hollyberry Red powder coat paint finish

Brown Kickplate powder coat paint finish Brown Kickplate powder coat paint finish

Natural Almond powder coat paint finish Natural Almond powder coat paint finish

Racing Red powder coat paint finish Racing Red powder coat paint finish

Semi-Gloss Black powder coat paint finish Semi-Gloss Black powder coat paint finish

Sky Blue powder coat paint finish Sky Blue powder coat paint finish

Textured Black powder coat paint finish Textured Black powder coat paint finish

**Gas types*:**

Propane Propane

Natural Gas, high altitude Natural Gas, high altitude

Propane, high altitude Propane, high altitude

Gas option:

Thermostat, for gas Thurmaduke™ Hot Food Units (Deluxe & Standard models), per section

Veneer:

Veneer plastic laminate on body (NOTE: Manufacturer's standard colors ONLY, metallics, color-core & raised textures may incur additional cost)

Cutting board - customer's side:

Cutting Board, customer's side, 7"D, 1/2" white poly, 18ga stainless steel shelf, (2) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$613.80 Cutting Board, customer's side, 7"D, 1/2" white poly, 18ga stainless steel shelf, (2) fixed brackets, shelf mounted flush to counter top (No hinged brackets)

Cutting Board/Shelf, customer's side, 7"D, 18ga stainless steel shelf, (2) fixed brackets, shelf mounted flush to counter top (specify any special height) +$330.30 Cutting Board/Shelf, customer's side, 7"D, 18ga stainless steel shelf, (2) fixed brackets, shelf mounted flush to counter top (specify any special height)

Cutting Board/Shelf, customer's side, 7"D, 18ga stainless steel shelf, (2) hinged brackets, shelf mounted flush to counter top (specify any special height) +$582.30 Cutting Board/Shelf, customer's side, 7"D, 18ga stainless steel shelf, (2) hinged brackets, shelf mounted flush to counter top (specify any special height)

Cutting Board/Shelf, customer's side, 7"D, 1" thick maple hardwood shelf, (2) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$330.30 Cutting Board/Shelf, customer's side, 7"D, 1" thick maple hardwood shelf, (2) fixed brackets, shelf mounted flush to counter top (No hinged brackets)

Cutting Board/Shelf, customer's side, 7"D, 1" thick maple hardwood shelf, (2) hinged brackets, shelf mounted flush to counter top +$582.30 Cutting Board/Shelf, customer's side, 7"D, 1" thick maple hardwood shelf, (2) hinged brackets, shelf mounted flush to counter top

Cutting Board, customer's side, 10"D, 1/2" white poly, 18ga stainless steel shelf, (2) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$775.80 Cutting Board, customer's side, 10"D, 1/2" white poly, 18ga stainless steel shelf, (2) fixed brackets, shelf mounted flush to counter top (No hinged brackets)

Cutting Board/Shelf, customer's side, 10"D, 18ga stainless steel shelf, (2) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$492.30 Cutting Board/Shelf, customer's side, 10"D, 18ga stainless steel shelf, (2) fixed brackets, shelf mounted flush to counter top (No hinged brackets)

Cutting Board/Shelf, customer's side, 10"D, 18ga stainless steel shelf, (2) hinged brackets, shelf mounted flush to counter top +$744.30 Cutting Board/Shelf, customer's side, 10"D, 18ga stainless steel shelf, (2) hinged brackets, shelf mounted flush to counter top

Cutting Board/Shelf, customer's side, 10"D, 1" thick maple hardwood shelf, (2) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$492.30 Cutting Board/Shelf, customer's side, 10"D, 1" thick maple hardwood shelf, (2) fixed brackets, shelf mounted flush to counter top (No hinged brackets)

Cutting Board/Shelf, customer's side, 10"D, 1" thick maple hardwood shelf, (2) hinged brackets, shelf mounted flush to counter top +$744.30 Cutting Board/Shelf, customer's side, 10"D, 1" thick maple hardwood shelf, (2) hinged brackets, shelf mounted flush to counter top

Cutting board - operator's side:

Cutting Board, operator's side, 7"D, 1/2" white poly, 18ga stainless steel shelf, (2) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$613.80 Cutting Board, operator's side, 7"D, 1/2" white poly, 18ga stainless steel shelf, (2) fixed brackets, shelf mounted flush to counter top (No hinged brackets)

Cutting Board/Shelf, operator's side, 7"D, 18ga stainless steel shelf, (2) fixed brackets, shelf mounted flush to counter top (specify any special height) +$330.30 Cutting Board/Shelf, operator's side, 7"D, 18ga stainless steel shelf, (2) fixed brackets, shelf mounted flush to counter top (specify any special height)

Cutting Board/Shelf, operator's side, 7"D, 18ga stainless steel shelf, (2) hinged brackets, shelf mounted flush to counter top (specify any special height) +$582.30 Cutting Board/Shelf, operator's side, 7"D, 18ga stainless steel shelf, (2) hinged brackets, shelf mounted flush to counter top (specify any special height)

Cutting Board/Shelf, operator's side, 7"D, 1" thick maple hardwood shelf, (2) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$330.30 Cutting Board/Shelf, operator's side, 7"D, 1" thick maple hardwood shelf, (2) fixed brackets, shelf mounted flush to counter top (No hinged brackets)

Cutting Board/Shelf, operator's side, 7"D, 1" thick maple hardwood shelf, (2) hinged brackets, shelf mounted flush to counter top (specify any special height) +$582.30 Cutting Board/Shelf, operator's side, 7"D, 1" thick maple hardwood shelf, (2) hinged brackets, shelf mounted flush to counter top (specify any special height)

Cutting Board, operator's side, 10"D, 1/2" white poly, 18ga stainless steel shelf, (2) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$775.80 Cutting Board, operator's side, 10"D, 1/2" white poly, 18ga stainless steel shelf, (2) fixed brackets, shelf mounted flush to counter top (No hinged brackets)

Cutting Board, operator's side, 10"D, 18ga stainless steel shelf, (2) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$492.30 Cutting Board, operator's side, 10"D, 18ga stainless steel shelf, (2) fixed brackets, shelf mounted flush to counter top (No hinged brackets)

Cutting Board/Shelf , operator's side, 10"D, 18ga stainless steel shelf, (2) hinged brackets, shelf mounted flush to counter top +$744.30 Cutting Board/Shelf , operator's side, 10"D, 18ga stainless steel shelf, (2) hinged brackets, shelf mounted flush to counter top

Cutting Board/Shelf, operator's side, 10"D, 1" thick maple hardwood shelf, (2) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$492.30 Cutting Board/Shelf, operator's side, 10"D, 1" thick maple hardwood shelf, (2) fixed brackets, shelf mounted flush to counter top (No hinged brackets)

Cutting Board/Shelf, operator's side, 10"D, 1" thick maple hardwood shelf, (2) hinged brackets, shelf mounted flush to counter top (Specify any special height) +$744.30 Cutting Board/Shelf, operator's side, 10"D, 1" thick maple hardwood shelf, (2) hinged brackets, shelf mounted flush to counter top (Specify any special height)

Duke TGHF-32PG

Specifications

Options

**Cube*:**

Certifications:

**Shelf Spacing*:**

Width (in):

Height (in):

Depth (in):

Serving Counter, Hot Food, Gas options

Counter top options:

**Spillage pans*:**

**Powder coat colors*:**

**Gas types*:**

Gas option:

Veneer:

Cutting board - customer's side:

Cutting board - operator's side:

Find what you need

Customer info

Get In Touch With Us

Duke TGHF-32PG

Specifications

Cube*:

Certifications:

Shelf Spacing*:

Width (in):

Height (in):

Depth (in):

Counter top options:

Spillage pans*:

Powder coat colors*:

Gas types*:

Gas option:

Veneer:

Cutting board - customer's side:

Cutting board - operator's side:

People also purchased

Find what you need

Customer info

Get In Touch With Us

**Cube*:**

**Shelf Spacing*:**

**Spillage pans*:**

**Powder coat colors*:**

**Gas types*:**